Power Washing a Brick House With Power Washing Services

You love your brick house, so why wouldn’t you want it to look brand new? Brick has been a popular choice for a long time because it has a rich look that doesn’t go out of style. Still, dirt, grime, and even moss can change the color and make the outside of your home look bad over time. A power washer can bring your brick back to its former beauty. Therefore, you can look for power washing services to look for experts to carefully wash your brick house. Also, if you do the steps below, that old brick will look brand new again. This blog will show you how to clean and repair the brick on the outside of your home using power washing, so it stays looking new.

Power Washing Services in Sacramento CA for Brick House

Cleaning or washing a brick house is different from washing an ordinary home. There are certain things you should be careful about. Therefore, it is best to look for power washing services in Sacramento CA to have experts help you wash your brick house. Here are some steps to help you effectively clean your house.

Before You Clean

Take good care of the bricks in your home. Before you try cleaning your brick walls, the operating power (PSI) you plan to use is the most important thing to consider. Older bricks and grout aren’t as strong as newer ones, and putting too much power on them will cause them to crack. This can lead to more serious problems, like water damage inside your home and a headache trying to fix the crack.

If you do it carefully, using a power washer on brick can be a good experience. It is best to use 800 PSI or less, which is more than enough power to clean your bricks without damaging your exterior walls. Don’t hover or stop moving when you’re cleaning because putting too much power in one spot for too long usually causes damage.

Patch Mortar Where Cracks are Visible

Before cleaning, you first need to fix any broken mortar joints between the bricks and let them dry for at least a week. This will stop water from getting behind the bricks and cause mold to grow on your walls.

We know this will be hard, especially since you’re thinking about power washing, but keeping bricks and mortar in good shape is very important. Follow the directions on the package for how to put the mortar on your bricks the right way.

Cover and Protect Windows and Outlets

To protect yourself and your home, it’s important to cover all electrical outlets outside. The job should be done with some tape or rubber bands and plastic wrap or bags.

Also, cover all windows, trim, doorways, and other exterior openings that you will be cleaning in areas where you will be cleaning bricks. If you happen to clean over your window, you’ll be glad you did it later.

Wet the Brick

Hiring experts for power washing services in Sacramento CA saves you from the stress of cleaning your house. Soak the surface of your house well. Doing this step is important before you use any cleaners because it will prepare the brick to be cleaned.

Here is a pro tip. Spray water from the bottom to the top of your house to ensure it gets wet everywhere. This will help to soak all surfaces evenly so that water doesn’t run down in different streams. This differs from how you should clean siding from top to bottom, so water doesn’t get into the folds.

Apply Detergent

Make sure you choose a cleaner that can be used on brick or siding. If you use the wrong type of detergent, dirt can stick to your mortar. Now spray the detergent on the brick, starting at the bottom and working your way up.

Give it 5–10 minutes to work into the brick. Less power and more detergent are what it takes to clean brick. Because bricks and mortar are porous, some soap and water will soak in. Using a lot of detergent and water can help clean all the places where dirt could get.

Let the soap get the dirt out of the brick by loosening it and moving it. It will be cleaner and brighter after this.

Brus Tough Stains

Use a rotary scrub brush on the very dirty and stained brick. This is a less rough method than using high-power water. It will help the detergent get into the brick and break up stains that are hard to clean.

Grease, grass stains where the grass was cut, moss, and even tree sap are hard to eliminate. Scrubbing these messes with a good brick-and-mortar cleaner can help break them up and get them to come loose.

Rinse the Bricks

Once the detergent has had time to soak into the brick and has had time to sit, switch to a fine spray pattern. Using a delicate pattern is very important because too much power can and will damage the brick. Hiring experts for power washing services in Sacramento CA will be best because they will effectively do their job and are also quick. Moreover, we suggest starting with a low power setting of less than 800 PSI and slowly increasing it if necessary.

Instead of spraying from top to bottom, as you did before, spray from the top down to remove the detergent and residue. Slow down, but keep going. Don’t just stand there with the power washer.

Apply Sealant

After the brick is clean and dry, the last step is to seal it with a sealant made for brick and mortar. By doing this, your bricks will stay cleaner for longer. It’s like having a premium car wash and then getting the wax and seal coat on your car. It keeps it safe and makes it look better for longer.

Because of the sealant, acids, oils, greases, and other harmful substances won’t get through the surface. They don’t change the bricks-and-mortar look. However,  when water or other liquids get on them, they bead up and run off instead of getting into the brick.If you are looking for experts to power wash your house or any building, you can contact A4 Painting Plus. Our experts have years of experience and the proper equipment to do the job. Moreover, they will take care of everything during the process.